Inconel Fasteners - Inconel bolts, Inconel nuts, Inconel screws
Inconel Fasteners
Inconel fasteners - bolts, nuts, screws, washers
| inconel bolts |
| inconel 718 bolts |
| inconel fasteners |
| inconel 625 bolts |
| inconel stud |
| inconel screws |
| inconel 718 fasteners |
| inconel 625 fasteners |
| inconel 600 bolts |
| inconel nuts |
| alloy 625 bolts |
| inconel bolts price |
| inconel 718 socket head cap screws |
| inconel 718 screws |
like Inconel 600, 601, 625, 686, 718, 725 & X750 fasteners- bolts, nuts, screws, washers, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel fasteners enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel fasteners. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel fasteners offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
Because Inconel fasteners offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (1204°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 fasteners
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 (2.4856) and Alloy 718 (2.4668)
· Inconel chart
· Inconel datasheets available on 625 and 718
The most common grades of Inconel nickel alloy fasteners are Inconel 625 (2.4856) and Inconel 718 (2.4668). Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Resources:
Inconel Fastener Types: Bolts, Nuts, Screws, Threaded Rods, Washers
