-
MP35N Flat Head Screws
MP35N flat head screws are known for their extraordinary strength and are the strongest screws we offer at RAYCHIN. MP35N screws owe their extraordinary strength to a unique alloy combination of nickel, cobalt, chrome and molybdenum and have ultimate tensile strengths that range from 227 ksi to 294 ksi (with age hardening). Beyond the strength of MP35N flat head screws, they are also exhibit good corrosion resistance and can resist most mineral acids, hydrogen sulfide, seawater and salt spray environments. MP35N screws are also resistant to high temperature oxidation and could operate in environments up to 800°F and still maintain much of its strength.
Send Email Details -
Flat Head Screws
Flat Head Screws RAYCHIN is a manufacturer and worldwide supplier of standard & custom fasteners（Flat Head Screws） including those manufactured from the following materials: Hastelloy® C-276, Hastelloy® C-22, Hastelloy® B-2, Hastelloy® G-30, Monel® 400, Monel® K-500, Inconel® 600, Inconel® 625, Inconel® 718, Incoloy® A-286, Titanium Grade 2, Titanium Grade 5, Titanium Grade 7, Nickel 200, Nickel 200, Aluminum, Molybdenum, Nimonic, Nitronic, Tantalum, Tungsten, Waspaloy, Zirconium, Duplex S31803, Duplex S32205 and Super Duplex S32750, etc.
Send Email Details -
Monel Flat Head Screws
Monel® flat head screws, like Monel 400 and K500, are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. An outstanding characteristic of Monel screws is that they offer exceptional resistance to hydrofluoric acid, a particularly tough acid to deal with, in all concentrations up to the boiling point. For hydrofluoric acid applications Monel flat head screws are perhaps the most resistant of all commonly used specialty alloys. Monel alloy 400 & K500 screws also exhibit excellent corrosion resistance in marine applications and have reasonable corrosion resistance to sulfuric and hydrochloric acids under reducing conditions. Because of these characteristics, Monel flat head screws are often found in marine and chemical processing applications.
Send Email Details -
MP159 Flat Head Screws
As aerospace engineering advances, so must the materials to meet the technological requirements of this industry. Screws made from MP159 have been developed to provide a solution to high temperature, high strength components. MP159 flat head screws offer strength capabilities similar to other Cobalt Alloys (MP35N) but can be used at much higher temperatures - up to 1100°F, compared to MP35N’s usable limit of 800F. In addition, MP159 flat head screws can be used beyond 1100°F in short term situations.
Send Email Details -
Hot
Waspaloy Flat Head Screws
Waspaloy flat head screws are known for their superb high strength at elevated temperatures. Waspaloy is a high performance nickel alloy combined with cobalt, chrome and molybdenum to create it’s unique combination of strength and high temperature stability. Similar to that of Inconel 718 screws, Waspaloy flat head screws exceed the strength and stability of Inconel 718 at elevated temperatures beyond 1400°F. In addition, the oxidation resistance of Waspaloy screws make it an ideal materials for high temperature applications like gas turbines engines, and a variety of other aerospace components.
Send Email Details -
Tungsten Flat Head Screws
Tungsten screws are known for their extreme high density; because of this unique attribute, they are often used for balancing rotating parts. Tungsten’s high mass also makes these fasteners radiopaque. This allows tungsten flat head screws to block radiation and show up well on x-rays – even better than lead. Another unique attribute of tungsten is its extrmely high melting point of 3420°C. The high temperature stability of tungsten screws make them ideal for some of the hottest vacuum furnace environments. Beyond their high mass and temperature stability, tungsten flat head screws are also very corrosion resistant. Tungsten fasteners are usually made from tungsten alloys per ASTM B777, and range from 90% to 97% pure tungsten, alloyed with nickel and copper or nickel and iron.
Send Email Details -
Tantalum Flat Head Screws
Tantalum flat head screws are best known for its unmatched corrosion resistance and chemical inertness. Tantalum screws have a similar corrosion resistance to that of glass, but all of the typical mechanical and electrical properties of a metal. Tantalum flat head screws are also extremely stable at high temperatures, since tantalum has a melting point around 3000°C. High temperature applications require vaccum or inert gas since tantalum may embrittle when used in oxygen rich environments above 250°C. Tantalum screws are also one of the most bio-compatible metals available and is also radio-opaque due to its high density (16.68 g/cm3). All tantalum flat head screws are available in commercially pure tantalum and tantalum 2.5% tungsten (Ta-2.5%W).
Send Email Details -
Molybdenum Flat Head Screws
Molybdenum flat head screws possess a very high melting point of 2620°C, a low coefficient of thermal expansion and a high level of thermal conductivity. Because molybdenum screws have the ability to withstand extremely high temperatures without changing shape, expanding or softening significantly, they are ideal for high strength / high temperature applications that are shielded from oxygen. Exposing molybdenum flat head screws to oxygen above 600°C will cause them to readily oxidize. As a result, molybdenum flat head screws find their way into high temperature vacuum furnaces, glass production, military and space applications where oxygen is not present.
Send Email Details -
Inconel Flat Head Screws
Inconel® flat head screws, like Inconel 600, 601,625,686,718 & 725 screws, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel flat head screws enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel screws. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Send Email Details
