Inconel Fasteners – The Complete Guide to Nickel-Chromium Superalloy Bolts, Nuts & Studs
When extreme temperatures, high stresses, and aggressive corrosion converge, Inconel fasteners deliver unmatched performance. RAYCHIN LIMITED, a specialist global manufacturer of nickel-alloy fasteners, produces the complete range of Inconel 718, 625, 600, 601, X-750 bolts, nuts, washers, stud bolts, and custom-machined parts[reference:0]. This guide consolidates our metallurgical knowledge to help engineers and procurement teams specify the correct grade for every critical joint.
Product Range
Inconel 718 Bolts
Hex bolts, 12-point aerospace bolts, socket head cap screws. ASME B18.2.1 / B18.3. Tensile ≥1275 MPa (185 ksi).
Inconel 625 Stud Bolts
Double-end and fully threaded studs per ASME B16.5. Outstanding seawater and chloride resistance.
Inconel 600 Nuts
Heavy hex nuts and lock nuts. Excellent high-temperature oxidation and carburization resistance.
Inconel X-750 Bolts
Precipitation-hardened, ideal for springs and high-temperature studs where relaxation resistance matters[reference:1].
Inconel 601 Washers
Flat and spring washers. Superior oxidation resistance for furnace hardware applications.
Custom Inconel Parts
Special threads, non-standard heads, and precision-machined components per drawing.
Material Grades & Standards
Inconel 718 vs 625: A Critical Selection Guide
Applications
- Aerospace & Defense: Turbine engine casings, landing gear attachments, flight control systems, rocket motor components[reference:2].
- Gas Turbines: Compressor and turbine section bolting requiring creep-rupture strength to 700°C.
- Subsea & Marine: Inconel 625 studs for seawater manifolds and offshore platform fasteners.
- Chemical Processing: Reactor bolts and heat exchanger fasteners handling aggressive acids.
- Nuclear: Reactor internals and high-temperature fastening systems.
Quality Assurance
- EN 10204 3.1 / 3.2 Material Test Certificates
- Positive Material Identification (PMI) reports
- Hardness verification (36–44 HRC for 718 after aging)
- Mechanical testing: tensile, yield, elongation, reduction of area
- Third-party inspection upon request
Frequently Asked Questions
What is the difference between Inconel 718 and Inconel 625?
Inconel 718 is precipitation-hardened and offers roughly twice the strength of 625, with excellent creep-rupture strength up to 700°C. Inconel 625 is solid-solution strengthened with superior corrosion resistance in seawater and chlorides but lower strength.
Which standards cover Inconel 718 fasteners?
AMS 5662 and AMS 5663 are the principal aerospace specifications. Minimum tensile strength is 185 ksi (1275 MPa) after solution treatment and aging[reference:3].
What is the maximum service temperature?
Inconel 718 maintains strength to 700°C and oxidation resistance to 982°C. Inconel 625 and 600 offer higher oxidation limits.
Can Inconel fasteners be used in seawater?
Yes, Inconel 625 is specifically recommended for seawater, acid, and pitting corrosion resistance[reference:4].
Does RAYCHIN provide material certificates?
Yes, EN 10204 3.1 / 3.2, PMI reports, and full mechanical test data are provided with every shipment.
Need Inconel Fasteners?
Contact our experts for a quote within 24 hours.
Email sales@ray-chin.comVisit www.ray-chin.com