RAYCHIN LIMITED

Waspaloy Fasteners – Complete Product Range

Critical Applications of Waspaloy Fasteners

International Standards & Global Designations – Waspaloy Fasteners

RAYCHIN LIMITED manufactures Waspaloy fasteners from vacuum induction melted (VIM) and vacuum arc remelted (VAR) or electroslag remelted (ESR) material conforming to the most widely used national and international specifications. All material is traceable to the mill.

Chemical Composition (Weight %) – Waspaloy (UNS N07001)

Our Waspaloy fasteners are produced from vacuum induction melted (VIM) and vacuum arc remelted (VAR) material conforming to the following limits per AMS 5708, AMS 5544, and ASTM B637 standards.

Waspaloy (UNS N07001) – Nickel-Based Superalloy

Metallurgical note: Waspaloy is a precipitation-hardening nickel-based superalloy strengthened through the formation of gamma prime (γ') phase Ni₃(Al, Ti) in a disordered FCC matrix (γ). The alloy is produced by vacuum induction melting (VIM) and vacuum arc remelting (VAR) or electroslag remelting (ESR) to ensure high purity and consistent properties. High-temperature strength is obtained from solid solution strengthening elements (molybdenum, cobalt, chromium) and aging elements (aluminum, titanium). The alloy maintains excellent strength and stability at temperatures exceeding those of Alloy 718, making it the preferred choice for critical rotating applications up to 650°C (1200°F).

Complete Mechanical & Physical Properties – Waspaloy (MPa / ksi)

Waspaloy fasteners are supplied in various heat-treated conditions per AMS specifications. Data represent typical values based on industry standards.

Mechanical Properties – Waspaloy (Fully Heat-Treated Condition)

High-Temperature Mechanical Properties – Waspaloy

Physical Properties – Waspaloy

High‑Temperature Performance of Waspaloy Fasteners

Waspaloy is renowned for exceptional high-temperature strength and stability, maintaining useful mechanical properties up to 870°C (1600°F) in oxidizing atmospheres. The alloy can be used at temperatures up to 650°C (1200°F) for critical rotating applications and up to 870°C (1600°F) for simpler applications. Waspaloy exhibits superior strength compared to Alloy 718 at temperatures exceeding 650-705°C (1200-1300°F). The alloy maintains approximately 60% of its room temperature tensile strength at 815°C (1500°F), with yield strength of 550-585 MPa (80-85 ksi). Excellent creep resistance under sustained loading at elevated temperatures ensures long-term reliability in gas turbine and aerospace applications.

Elevated Temperature Capabilities

High-Temperature Comparison – Waspaloy vs. Alloy 718

Note: Waspaloy excels in applications requiring maximum strength at elevated temperatures, particularly in gas turbine hot sections where alloy 718 would be inadequate.

Exceptional Corrosion Resistance of Waspaloy Fasteners

Waspaloy offers outstanding corrosion resistance in high-temperature oxidizing and sulfidizing environments, making it suitable for the most demanding applications in gas turbines, aerospace, and chemical processing.

• Oxidation Resistance: Outstanding resistance to scaling and oxidation up to 870°C (1600°F). Performs well in combustion environments and under frequent thermal cycling conditions.
• Sulfidation Resistance: Superior performance in sulfur-containing environments found in gas turbine engine service. Resists attack by sulfur compounds at elevated temperatures.
• Hot Corrosion: Good resistance to hot corrosion in the presence of combustion products. Designed to operate at high temperatures up to 700°C in aggressive environments.
• Type 1 Hot Corrosion: Resistance to hot corrosion type 1 (815-955°C) where salt is in liquid state.
• Type 2 Hot Corrosion: Resistance to hot corrosion type 2 (595-815°C) where reaction rate can be very high.
• Salt Spray Environments: Performs well in salt spray environments found in gas turbine engine service.
• Atmospheres: Good performance in atmospheres encountered in gas turbine engine service.
• Solution Treated Condition: Solution treated material offers the best corrosion resistance.
• Oxide Formation: Forms protective oxides (Cr₂O₃, Al₂O₃, TiO₂) that provide excellent high-temperature corrosion resistance.
• Bimetallic Corrosion: Can be safely connected to other nickel-based superalloys, stainless steels, and titanium alloys with appropriate precautions.

Manufacturing Standards – Waspaloy Fasteners

All Waspaloy fasteners are manufactured and tested to meet the following standards:

We offer surface finishes: plain (as-machined), chemical cleaned, passivated. Silver plating per AMS 2410 available for anti‑seize. Controlled solution and precipitation heat treatment processes per AMS 5704/5705 ensure optimal mechanical properties. NADCAP accredited heat treatment processes. Specialized thread rolling and surface treatment for high-temperature applications. Full traceability and destructive/non‑destructive testing available (UT, FPI, MPI). AS9100 and ISO 9001:2015 certified quality management. ISO 13485 certified for medical applications with cleanroom packaging available.