Industry News
254 SMO Fasteners | UNS S31254 Bolts, Nuts, Studs – RAYCHIN LIMITED
254 SMO Fasteners | UNS S31254 Bolts, Nuts, Studs – RAYCHIN LIMITED

254 SMO Fasteners – The Complete Guide to 6% Molybdenum Super Austenitic Stainless Steel Bolts, Nuts & Studs

Published by RAYCHIN LIMITED · Special Alloy Fastener Manufacturer & Global Supplier

When chlorides and seawater push conventional stainless steels beyond their limits, 254 SMO fasteners provide the ultimate corrosion resistance. RAYCHIN LIMITED supplies the complete range of 254 SMO (UNS S31254) bolts, nuts, washers, stud bolts, and custom-machined parts. With a PREN greater than 43, 254 SMO approaches the performance of super duplex alloys in pitting and crevice corrosion resistance[reference:15]. This guide provides the technical depth engineers need to specify the correct fasteners for the most aggressive environments.

✔ ASTM A479 / A276 / EN 1.4547 Certified  |             ✔ PREN > 43  |             ✔ 6% Molybdenum + Nitrogen  |             ✔ Outstanding Seawater Resistance

Product Range

254 SMO Bolts

Hex bolts per ASME B18.2.1 and DIN 931/933. Sizes M6–M48 and 1/4″–2″.

254 SMO Stud Bolts

Double-end and fully threaded studs per ASME B16.5 for seawater piping flanges.

254 SMO Nuts

Heavy hex nuts and lock nuts. Proof-load matched to corresponding bolts.

254 SMO Washers

Flat and spring washers. Custom OD/ID and thickness available.

254 SMO Threaded Rod

Continuous-thread studding for chemical and marine applications.

Custom 254 SMO Parts

Special threads, non-standard heads, and precision-machined components per drawing.

Chemical Composition

ElementTypical %
Carbon (C)≤0.02
Chromium (Cr)19.5–20.5
Nickel (Ni)17.5–18.5
Molybdenum (Mo)6.0–6.5
Nitrogen (N)0.18–0.22
Copper (Cu)0.50–1.00
Iron (Fe)Balance

Mechanical Properties

  • Tensile Strength: 650–850 MPa[reference:16]
  • Yield Strength (0.2%): ≥300 MPa
  • Elongation: 35–50%[reference:17]
  • Density: ~8.0 g/cm³[reference:18]
  • PREN: >43[reference:19]

Applications

  • Seawater Systems: Heat exchangers, piping, and pump fasteners in desalination and offshore platforms.
  • Chemical Processing: Reactors and vessels handling chlorides, sulfuric acid, and phosphoric acid.
  • Pulp & Paper: Bleaching equipment and digester fasteners.
  • Flue Gas Desulfurization: Scrubber bolting and ductwork fasteners.
  • Oil & Gas: Wellhead equipment and sour service bolting.

Quality Assurance

  • EN 10204 3.1 / 3.2 Material Test Certificates
  • Positive Material Identification (PMI)
  • Mechanical testing: tensile, yield, elongation, hardness
  • PREN calculation verification
  • NACE MR0175 compliance available

Frequently Asked Questions

What is 254 SMO?

254 SMO (UNS S31254) is a super austenitic stainless steel with 6% Mo and nitrogen, providing PREN>43 for exceptional chloride resistance.

What is the maximum service temperature?

Continuous service up to approximately 400°C in many environments. Prolonged exposure above 600°C may cause sigma-phase precipitation.

Which standards cover 254 SMO fasteners?

ASTM A479, ASTM A276, and EN 1.4547. NACE MR0175 compliance available.

Does RAYCHIN provide material certificates?

Yes, EN 10204 3.1 / 3.2 and full test reports are standard.

Need 254 SMO Fasteners?

Contact our experts for a quote within 24 hours.

Email sales@ray-chin.com

Visit www.ray-chin.com

Request A Quote! We'll respond as soon as possible(within 12 hours)

Submit