Categories List
Recent Posts
310 & 310S Fasteners in High‑Temperature Industries: Furnaces, Heat Exchangers, Kilns & Beyond
When standard stainless steels reach their thermal limits—where oxidation, scaling, and thermal fatigue would cause rapid failure—310 and 310S stainless steel fasteners become essential. With their exceptional resistance to high‑temperature oxidation (up to 1100°C), these alloys secure critical components in furnaces, burners, kilns, heat exchangers, thermal oxidizers, and power generation equipment. RAYCHIN LIMITED, a specialist global manufacturer and supplier of high‑temperature alloy fasteners, provides the complete range of 310 and 310S bolting solutions to the world's most demanding thermal industries. This guide maps each alloy to its ideal application, giving engineers the knowledge to specify with confidence.
Industry Applications
? High Temperature Furnaces
310 fasteners for high temperature furnaces secure heating elements, radiant tubes, muffles, and structural supports. With continuous service temperatures up to 1100°C, 310 resists the scaling and metal loss that would destroy lower‑grade stainless steels. RAYCHIN supplies 310S hex bolts, studs, and washers for furnace OEMs and MRO worldwide.
⚡ Heat Exchangers
310 bolts for heat exchangers are specified for tube sheet assemblies, baffle connections, and flanged joints in high‑temperature gas‑to‑gas or gas‑to‑liquid exchangers. The alloy's thermal stability and resistance to oxidation prevent thread degradation and maintain joint integrity over extended cycles.
? Burners & Combustion Systems
310 fasteners for burners endure direct flame impingement and rapid thermal cycling. In industrial gas and oil burners, 310 bolts secure flame holders, igniter mounts, and diffuser plates. The alloy's high chromium content forms a protective scale that resists spalling and erosion.
? Kilns & Ceramic Processing
310 bolts for kilns are used in brick‑laying fixtures, door clamps, and thermocouple assemblies. In brick, tile, and ceramics kilns, the fasteners must resist temperatures up to 1100°C and the corrosive effects of combustion products. RAYCHIN can supply custom lengths and head configurations for specific kiln designs.
? Annealing Boxes & Heat‑Treat Fixtures
310 fasteners for annealing boxes secure lids, stacking frames, and material supports in vacuum and controlled‑atmosphere furnaces. The low‑carbon 310S variant is preferred to avoid intergranular corrosion after repeated thermal cycling.
⚡ Power Generation
310 fasteners for power generation are found in boiler casing bolting, superheater support connections, and exhaust ducting flanges. The alloy's resistance to fly ash corrosion and steam oxidation makes it a reliable choice for fossil fuel and waste‑to‑energy plants.
? Chemical Processing
310 fasteners for chemical processing secure reactor flanges, catalyst bed supports, and high‑temperature piping in sulfuric acid regeneration, ethylene cracking, and ammonia synthesis. The alloy resists sulfidation and carburization at elevated temperatures.
?️ Oil & Gas
310 fasteners for oil and gas applications include flare tip bolting, refractory anchor bolts, and delayed coker drum connections. The alloy's thermal fatigue resistance is critical for equipment exposed to cyclic heating and cooling.
? Exhaust Systems
310 exhaust bolts secure manifold flanges, turbocharger housings, and exhaust duct connections in heavy‑duty diesel and industrial engines. While not as strong as A286 or Nimonic, 310 provides cost‑effective oxidation resistance for moderately loaded exhaust fasteners up to 800°C.
⚙️ Steam Turbines
310 fasteners for steam turbines are used in high‑pressure casing bolting, valve bonnet studs, and steam chest connections. The alloy resists steam oxidation and maintains its mechanical properties through repeated start‑stop cycles.
? Catalytic Converters
310 fasteners for catalytic converters withstand the exothermic heat generated during catalytic reactions. They secure the converter shell, substrate supports, and heat shield attachments in automotive and stationary emission control systems.
?️ Thermal Oxidizers
310 fasteners for thermal oxidizers operate in VOC abatement systems where temperatures reach 800–1000°C. The alloy's resistance to oxidation and thermal fatigue ensures reliable performance in these critical environmental compliance units.
Why RAYCHIN for Your 310 & 310S Fasteners?
- Integrated manufacturing: In‑house CNC machining, thread rolling, and solution annealing ensure consistent quality and rapid lead times.
- Material options: Both 310 (UNS S31000) and 310S (UNS S31008) stocked in diameters from 1/4″ to 2‑1/2″. We can advise on the optimal alloy for your temperature range and exposure conditions.
- Full certification: EN 10204 3.1 as standard; 3.2 available. PMI reports and mechanical test results for every lot.
- Anti‑galling support: Pre‑applied high‑temperature anti‑seize coatings and Nitronic 60 nut pairing options to prevent thread seizure during assembly.
Send your operating conditions, specifications, or part numbers to our technical team. We'll provide a detailed compliance assessment and competitive quotation within 24 hours.
✉️ sales@ray-chin.com? www.ray-chin.com | 310 · 310S · Furnace · Heat Exchanger · Exhaust
Request A Quote! We'll respond as soon as possible(within 12 hours)
Get a Quote